SOME TRICKS FOR MASTERS

8 People Can Use The Same Msn Dial Up Account
[r]its easy really. want to have an entire family on dial-up with just one bill?

step one. purchase 20 dollar a month subscription to MSN unlimited access dial up. This will include an MSN 9 cd which you will need. With the software installed, fill up your secondary account slots with new users. Make sure you pick @msn if it gives you the choice, hotmail email addresses will not work..

say the secondary account is johnsmith@msn.com type in the Dial up connection

USER : MSN/johnsmith
PASS: ******* (whatever)

connect to your local msn phone number and the other people you gave secondary accounts to will be able to do the same, while you are connected. Its a sweet deal considering everyone is paying about 2 bucks a month for internet access, especially if you cannot get broadband. if you wanted to sell off the access to people you could actually make money doing this.. but i do not suggest it.

I used to be an msn tech and this was a little known secret even to most of the employees.

After you do this you do not need the software any more. I would suggest keeping it on to micromanage everyone else's accounts. and for the simple fact that if they don't pitch in, cut them off HEHEHE

i'm on broadband now so i dont care if i tell you my little secret. anyone else knew of this?


How to Rip TM Dynamic Flash Templates
How to Rip TM Dynamic Flash Templates
by: SANKET S PATIL
What you need:

Sample dynamic flash template from TM website
Sothink SWF Decompiler
Macromedia Flash
Yourself


1. browse or search your favorite dynamic flash template in TM website. If you got one... click the "view" link and new window will open with dynamic flash.. loading...

2. If the movie fully loaded, click View -> Source in your browser to bring the source code of the current page and in the source code, search for "IFRAME" and you will see the iframe page. In this example were going to try the 7045 dynamic template. get the URL(ex.
http://images.templatemonster.com/screenshots/7000/7045.html) then paste it to your browser... easy eh? wait! dont be to excited... erase the .html and change it to swf then press enter then you'll see the flash movie again icon_smile.gif.

3. copy the URL and download that SWF file.. use your favorite download manager.. mine I used flashget icon_smile.gif NOTE: dont close the browser we may need that later on.

4. open your Sothink SWF decompiler... click "Quick Open" then browse where you download your SWF/movie file. Click Export FLA to export your SWF to FLA, in short, save it as FLA icon_smile.gif

5. Open your Macromedia FLash and open the saved FLA file. press Control+Enter or publish the file... then wallah! the output window will come up with "Error opening URL blah blah blah..." dont panic, that error will help you where to get the remaining files.

6. Copy the first error, example: "7045_main.html" then go back to your browser and replace the 7045.swf to 7045_main.html press enter and you'll see a lot of text... nonsense text icon_lol.gif that text are your contents...

BA REGEDIT
ok m8s,
any of you that do websites and like to open .html and similar files in notepad to edit scrpits, this is THE coolest windows registry edit ever
you can download the zip file with the .reg in it (run it and it automatically adds itself to your registry) or do it manually
CODE
[content suppressed]


Manually: regedit and navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\*\Shell
add the key "notepad"
it's default value should be "Open with Notepad"
now, under "notepad", add the key "Command"
it's default value should be (with the quotes) "C:\Windows\System32\Notepad.exe" "%1"

ok, exit regedit and go right click on ANY file...
your new option: Open with Notepad

HOW BADASS IS THAT?!?!?!?
I FOUND THIS ONE ON MY OWN!!!!!!

i know this one works on XP and 2000, you can PROBABLY enter it manually on windows 9x, but i have not tested that


okay okay, i know maybe not everyone cares...but this was fun for me because i love tweaking my computer AND it makes some web design stuff eaiser for me :D

Boot Winxp Fast
Boot Winxp Fast

Follow the following steps

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

Do you want to jazz up your graphics? Want to add a bit of pazazz to your art? Well, this guide features some knowledge, border effects, and even directions to make your own swirlie brushes!

Now, open PSP and get ready to learn! Let's start off with the basics.

-------------------------------------------------
-Border Effects

There are two main types of borders, solid borders, and decorative borders. A solid border is like a colored line that raps around the outside of your image and separates graphics from the rest of the page. You can have borders inside the outside borders to make awesome layer effects. Decorative borders are almost the same, except they are not completely connected. (Example - Dashed Borders)
-------------------------------------------------
Dashed Borders
Open PSP and create an image about 380 x 100 pixels with a white background.

Draw a bit with your paintbrush, just add some color. Now maximize your image.

It should take up the whole page. Now go up to the toolbar on the very top and click "Selections" and go down right below that and click "Select All" There should be a dotted line going around the outside of your image.

We're almost done! YAY! Ok, now look on your keyboard. Go to the very top row next to the F1, F2, F3, F4, and look to the right of the F12 button. It should say "Print Screen". Press it, and it will take a picture of everything currently open on your computer that you can see. Now go to the top toolbar once one. Go under "Edit", move down to "Paste", then move your mouse to the right and select "Paste as New Image"

Now, your image has a dashed border, but you can see all the unwanted parts of your workspace. So go to the left toolbar and click the crop tool. It is the small square with a line through it.
Now drag the segment the crop tool makes just around the image. You might want to zoom in some (Click the magnifying glass on the left toolbar on the spot you want to zoom in). Once you have it fully outlined with the crop segment, double-click to crop it.

Your image now has a dashed border. So just go to the top toolbar once again, go under "File" and click "Save As". Then, select the spot and name to save it.

-------------------------------------------------
-Font Suggestions and Styles

So you know how to make a cool border for your images. Now what about fonts? Well usually, for siggies, you would put a bigger font saying their name, and a smaller font with sub-text. Look at my signature:



See how it says "Anonymous" in a large font that matches the background; then under it, it says "SOD's coolest member" (my sub-text) in a smaller font? That's the usual format for text on signatures. Of couse, this isn't the only way.

Now, for some font suggestions:

Larger Fonts
Laurenscript
Baby Kruffy (This one is awesome!)
Casual
Chick
Cheri
Walt Disney
Mullet
Dolphins (yippee!)
Jelly Belly
Flubber
Porky's
Gilligan's Island
Cheeseburger

Smaller Fonts
Redensek
Mullet
Georgia
Acknowledge
Tahoma

FIX BROKEN IE
So one of your friends, “not you of course”, has managed to nuke Internet Explorer and they are unsure how they did it. You’ve eliminated the possibility of viruses and adware, so this just leaves you and a broken IE. Before you begin to even consider running a repair install of the OS, let’s try to do a repair on IE instead.

THE REPAIR PROCESS

Start the Registry Editor by typing regedit from the Run box. Go to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Active Setup \ Installed Components \ {89820200-ECBD-11cf-8B85-00AA005B4383} and then right-click the “IsInstalled value.” Click Modify. From there, you will change the value from 1 to 0. All right, go ahead and close the editor and reinstall IE from this location. /http://www.microsoft.com/windows/ie/default.mspx

IF SOMETHING GOES WRONG

If messing with the registry and something goes horribly wrong, you can use “Last Known Good Configuration (F8 Safe Mode)” or a Restore Point to get back to where you were before, with your settings. Then you can try again, this time taking care to watch the portion of the registry you are changing. Most people who have troubles with this end up changing the wrong registry key.

Hope this tut helps some members.
AUTOMATIC WINDOW INSTALLATION WITH NO KEYPRESS REQ
An unattended Windows XP/2003 install can install all your software and settings along with Windows, and without you having to click a button or press a key,completely automated. Learn how over here:

CODE
AUTO END TASKS TO PROPER SHUTDOWN
This reg file automatically ends tasks and timeouts that prevent programs from shutting down and clears the Paging File on Exit.

1. Copy the following (everything in the box) into notepad.


QUOTE
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"ClearPageFileAtShutdown"=dword:00000001

[HKEY_USERS\.DEFAULT\Control Panel\Desktop]
"AutoEndTasks"="1"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control]
"WaitToKillServiceTimeout"="1000"


2. Save the file as shutdown.reg
3. Double click the file to import into your registry.

NOTE: If your anti-virus software warns you of a "malicious" script, this is normal if you have "Script Safe" or similar technology enabled.


http://unattended.msfn.org


Make your unattended setup now!


EEP CODE ERRORS
Standard Original IBM POST Error Codes
Code Description

1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System

Cant See Secure Sites
Cant See Secure Sites

Fix the problem with seeing them secrue sites (banks or online stores) i found this very usefull to me at my work (isp backbone support lol, at the time i was regular support )

Any way... what u need to do is make a new notepad file and write in it the followng DLL's.. just copy-paste these



regsvr32 SOFTPUB.DLL
regsvr32 WINTRUST.DLL
regsvr32 INITPKI.DLL
regsvr32 dssenh.dll
regsvr32 Rsaenh.dll
regsvr32 gpkcsp.dll
regsvr32 sccbase.dll
regsvr32 slbcsp.dll
regsvr32 Cryptdlg.dll


and save it as > all file types, and make it something like securefix.bat.

then just run the file and ur problem shuld be gone.

Change The Default Location For Installing Apps
As the size of hardrives increase, more people are using partitions to seperate and store groups of files.

XP uses the C:\Program Files directory as the default base directory into which new programs are installed. However, you can change the default installation drive and/ or directory by using a Registry hack.

Run the Registry Editor (regedit)and go to

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

Look for the value named ProgramFilesDir. by default,this value will be C:\Program Files. Edit the value to any valid drive or folder and XP will use that new location as the default installation directory for new programs.

CMD Prompt here, add to folder context menu window
add the open cmd prompt to folder context menus
also drives and My Computer

copy what's in the code area to notepad and save as cmd here.reg

CODE

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Drive\shell\cmd]
@="Command Prompt"

[HKEY_CLASSES_ROOT\Drive\shell\cmd\command]
@="cmd.exe /k \"cd %L\""

[HKEY_CLASSES_ROOT\Directory\shell\cmd]
@="Command Prompt"

[HKEY_CLASSES_ROOT\Directory\shell\cmd\command]
@="cmd.exe /k \"cd %L\""

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\cmd]
@="Command Prompt"

[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{20D04FE0-3AEA-1069-A2D8-08002B30309D}\shell\cmd\command]
@="cmd.exe /k \"cd %L\""
BURNING X-BOX & GAMECUBE GAMES USEING CDRWIN
BURNING X-BOX & GAMECUBE GAMES USEING CDRWIN
------------------------------------------------------
1) Insert your original in your CD-ROM.
2) Open CDRWin (or any other image extractor) to make an iso image of the game
on your hard disc. Click on 'Extract Disc/Tracks/Sectors'
3) Here are the settings which work for me (!):
Disc Image/Cue sheet
File-Format: Automatic
Reading-Options:
RAW, CD+G, CD-TEXT and MCN/USRC all Unchecked
Error Recovery: Ignore
Jitter Correction: Auto
Subcode Analyses: Fixed
Data-Speed: MAX
Read Retry Count: 10
Audio Speed: MAX
Subcode Threshold: 900
There are a lot of reports, that Raw reading also works, but I had problems with it enabled.
4) Click on 'Start'
--------------------------------------------------------------------------------
RECORDING TO A DISC
--------------------------------------------------------------------------------
1) Install Fireburner

2) Double click on the Cue File For The Game
3) Right Click And select burn To CD
That?s all there is record DAO, and you can try to burn it fast at 2X
Using PNY Black Diamond CDR'


Create A Huge File
Create A Huge File

You can create a file of any size using nothing more than what's supplied with Windows. Start by converting the desired file size into hexadecimal notation. You can use the Windows Calculator in Scientific mode do to this. Suppose you want a file of 1 million bytes. Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits—000F4240.

Now open a command prompt window. In Windows 95, 98, or Me, you can do this by entering COMMAND in the Start menu's Run dialog; in Windows NT 4.0, 2000, or XP enter CMD instead. Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. Type RCX and press Enter. Debug will display a colon prompt. Enter the last four digits of the hexadecimal number you calculated (4240, in our example). Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). Enter W for Write and Q for Quit. You've just created a 1-million-byte file using Debug. Of course you can create a file of any desired size using the same technique.
Create One-Click Shutdown and Reboot Shortcuts:
Create One-Click Shutdown and Reboot Shortcuts:


First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c "Rebooting your PC"
Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message "Rebooting your PC." The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c "Bye Bye m8!"
shutdown -r -t 03 -c "Ill be back m8 ;)!"

Switch
What it does

-s
Shuts down the PC.

-l
Logs off the current user.

-t nn
Indicates the duration of delay, in seconds, before performing the action.

-c "messagetext"
Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f
Forces any running applications to shut down.

-r
Reboots the PC. how to execute chm files in linux
how to execute chm files in linux

download the following rpms on ur pc:-

http://dag.wieers.com/packages/chmlib/chmlib-0.35-1.1.fc3.rf.i386.rpmftp://rpmfind.net/linux/dag/fedora/3/en/i386/dag/RPMS/wxGTK-2.4.2-5.1.fc3.rf.i386.rpmhttp://acmserver.cs.ucr.edu/%7Ensoracco/rpms/xchm-0.9.8-1.i386.rpm

and also install them in the same sequence. using the command:-

rpm -ivh

Note:- i am giving the path of packages for fedora cpre 3. if want for any other os take a look at the following sites.

chmlib:- http://dag.wieers.com/packages/chmlib/
wxGTK:- ftp://rpmfind.net/linux/dag/
xchm: - platform independent for all redhat's.............

How To Make Your Own Radio Station
How To Make Your Own Radio Station

Must HAVE Winamp (Any Version)
First, things First your speed has to be at least 256/64 kbps (which means Dial-up users, will have alot of latency, just dnt bother)
Second, your going to have to have a domain, an updated one with the current i.p active. (Could be anything e.g. My sig)

Now, Your gonna have to download the Shoutcast Files.

Go to www.shoutcast.com to get the files.

Ok After downloading these, installing Both of them in any order i dnt care. Go to START>PROGRAM FILES>SHOUTcast DNAS>EDIT SHOUTCAST DNS CONFIG.

Ok your gonna have to Configure it:
Go Down and where it says password: change (that means your gonna have to change it to whatever, make sure u remember)
The Portbase: change it to whatever port you want it
Maxusers: (lets be realistic here, dnt put in 10000, like NXS's radio station) your bandwidth has to be extremely good, if your cable, 50 user max is ok, ADSL should stay below 10 users, and T1 connections should do whatever tickles there fantasy.

Open winamp, RIGHT CLICK>OPTIONS>PREFRENCES>DSP EFFECT> and choose the NULLSOFT SHOUTCAST.

Go to OUTPUT, and then click on Connection, Through the ADDRESS, type your address which you have done through www.no-ip.com, PORT NUMBER, whatever u did in the EDIT.txt, and your password.

Then go to Encoder, and choose your quality of your music. Go back to OUTPU>OUTPUT CONFIG> YELLOW PAGES. this is your advertisemant information. dow hatever you like there.

Now Connect. to check that your Radio os on-line go to http://(your address that you added in the prefrence)
How to save Windows xp updates
Go to the Windows Update web site.
In the left pane, under Other Options, select “Personalize Windows Update”.
Under “Set Options for Windows Update”, select the checkbox for “Display the Link to Windows Update Catalog under ‘See Also’”, then click “Save Settings”.
Go back to the Windows Update web site.
In the left pane, under “See Also”, select “Windows Update Catalog”.
Select “Find Updates for Microsoft Operating Systems”.
Select the operating system and language of your choice.
Select “Critical Updates and Service Packs”.
Select all of the patches you’d like to download, then click on “Go to download basket” to download them.
How To Restrict Login Hours Allowed
[voilet]To restrict a users logon hours , use the net user command. These commands are used from the Command Prompt. (Start - RUN - and type cmd)

Below are some examples:

1 - net user Joanna /time:M-F,08:00-17:00

2 - net user Ninja /time:M-F,8am-5pm

3 - net user Echelon /time:M,4am-5pm;T,1pm-3pm;W-F,8:00-17:00

4 - net user Shine /time:all (this one means this user can always log on)


Note:You can only restrict when a user can log on to the system. On a stand alone computer, there is no way to force a user to log off when their hours expire, without a third party script or software.
how to search google for RAPIDSHARE linkS
how to search google for RAPIDSHARE links


If you wanna find some apps, files etc on rapidshare.de via google, do the following.

Paste this into the google search window (not the adress bar):

site:rapidshare.de -filetype:zip OR rar daterange:2453402-2453412

* this searches the site rapidshare.de for any file that is rar or zip, and
has been indexed between 1-11 February.

dvd site:rapidshare.de -filetype:zip OR rar daterange:2453402-2453412

* this is the same search but it specifically searches for "dvd" with the same
search criteria, so any app posted with the word dvd in it will be found.

There are mainly three criteria to keep in mind when doing this search.

1. site: your site of choice to search

2. filetype: filetypes you wanna search,if you put a "OR" after the first
filetype you can add more.

3. daterange: (start date-enddate)

* this uses the "julian calendar", converter can be found here:

Code:
http://aa.usno.navy.mil/data/docs/JulianDate.html